Selve Blind Drive SIS

371531

• The SIS is a drive for internal sun protection
• with integrated SMI technology. SMI stands for "Standard Motor Interface", a manufacturer-independent, uniform motor interface for building technology, with which the SIS can be integrated into various bus systems. However, the drive can also be used without SMI control. Operation then takes place via a standard roller shutter switch/button
• The SIS is used for blinds in 25mm headrails and has a short overall length of 127 mm
• The upper limit position is set automatically; point-to-point operation can also be set as an option. The limit positions can be set manually using the SIS setting cable
• The SIS has integrated overload protection in the up and down directions.
• Connection is made via an RJ12 plug. Pre-assembled cables are available in various lengths
  
• Always synchronous operation of the blinds in parallel operation
• Reduced speed when starting and stopping
• Adjustable motor speed
• Adjustable slat tilt
• Automatic length compensation after 50 operating cycles
• Automatic limit switch setting
• Easy setting of the limit switches with a setting cable
• Pluggable connection cable (RJ 12 plug)
• Compatible with all common tilt wands
• suitable for 25mm blind headrail
• Max. torque: 0.9 Nm
• Rated torque: 0.65 Nm
• Speed (adjustable via SMI): 5 … 30 1/min
• Recommended supply voltage: 24 VDC
• Supply voltage range: 20 … 28 VDC
• Protection class: IP 20
• Power consumption (max.): 12 W
• Power consumption (rated power): 7.2 W
• Power consumption (standby): < 0.1 W
• Max. duty cycle: 10 minutes at +25°C
• Operating temperature: 0° C … +85 °C
• Dimensions: 127 mm x 24 mm x 24 mm
• Hexagon: 6 mm
• Made in Germany

Scope of delivery: 1 piece