Selve Tubular Motor SEE 2/20-NHK 20Nm

388362

• Tubular motor with NHK emergency manual crank connection
• without radio control
• The escape route drive for added safety
• The SEE-NHK is an electronic roller shutter drive that can be conveniently operated via a wall switch or, in an emergency due to power failure, via a hand crank
• Building on the SEE drive, the SEE-NHK combines the sophisticated features of the SEE drive, such as the simplest limit switch setting, maximum curtain protection, and secure closing of the curtain, with maximum operating safety
• After the SEE-NHK drive has been cranked up manually, the drive automatically relearns the limit positions
  
• The freewheel installed between the crank and the joint bearing ensures that the curtain can only be cranked in the correct direction, i.e., upwards. This ensures that the system is not damaged. When cranking in the wrong direction, the force is not transmitted by the freewheel
• Plug-and-play: No limit switch setting required, not even after emergency operation
• Obstacle detection in the downward direction
• Learning overload protection in the upward direction
• Anti-freeze protection
  
• Similar to illustration (delivery without adapter, driver, bearing)
• Only usable with rigid shaft connectors
• Outer diameter: 45 mm
• Suitable for: SW60
• Rated torque: 20 Nm
  
• Rated speed: 17 rpm
  
• Duty cycle: 4 min
• Rated voltage: 230 V
• Traction force N: 610
• Gear ratio: 13:1
• Power consumption: 172 W
  
• Frequency: 50 Hz
• Current consumption: 0.75 A
• Connection cable: 4-wire, 3m cable length
• Protection class: IP44
  
• Total length: 604 mm
  
• Made in Germany

Scope of delivery: 1 motor with connection cable