FG Artikel Nummer: 300267

378,95€

Taxes included. Shipping calculated at checkout.

Express Versand möglich

Abholung bei Fenstergigant möglich

Becker roller shutter motor L60-11-E25 60Nm NHK

2060 140 003 0

Becker roller shutter motor
Recommended application: Roller shutters and roller doors
without radio
with manual override
Electronic limit switch
Suitable for winding shafts from Ø 63mm
Obstacle detection: Switches off in the event of obstructions (e.g. freezing) and torque increase
Intelligent installation management enables fast limit position corrections during installation
Limit position setting: Automatic detection with existing stops
Automatic curtain length compensation: Stretching of the curtain is automatically detected and corrected by the drive
Limit position status indicator: The drive indicates the absence of a limit position with a short movement interruption
Can be switched in parallel
Installation exclusively with rigid shaft connectors
Motor protected against overheating
Suitable for right and left-hand installation
Suitable for: SW70
Nominal torque: 60Nm
Nominal speed: 11 rpm
Nominal voltage: 230 V
Frequency: 50Hz
Power consumption: 265W
Current consumption: 1.12A
Outer diameter: 58mm
Protection class IP44
Frequency 50Hz
Weight: 4.50 kg
Connection cable: 0.5m length - rubber - H05RR-F4G0.75 - in black
Total length: 804 mm
Made in Germany