FG Artikel Nummer: 300264

228,95€

Taxes included. Shipping calculated at checkout.

Express Versand möglich

Abholung bei Fenstergigant möglich

Becker roller shutter motor R20-17-E25 20Nm NHK

2020 140 009 0

Becker roller shutter motor
Application recommendation: Roller shutters and roller doors
Wired (no radio control)
With manual override (crank handle connection)
Electronic limit switch
Suitable for winding shafts from Ø 50mm
Obstacle detection: Switches off in case of obstructions (e.g. freezing) and torque increase
Intelligent installation management allows for quick limit position adjustments during installation
Limit position setting: Automatic detection with existing stops
Automatic curtain length compensation: Stretching of the curtain is automatically detected and corrected by the drive
Limit position status indicator: The drive indicates the absence of a limit position with a brief movement interruption
Can be switched in parallel
Image similar (Delivery excludes adapter, drive ring, and bearing)
Installation exclusively with rigid shaft connectors
Motor protected against overheating
Suitable for right-hand and left-hand installation
Nominal torque: 20Nm
Nominal speed: 17 rpm
Nominal voltage: 230 V
Frequency: 50Hz
Power consumption: 160W
Current consumption: 0.7A
Outer diameter: 45mm
Protection class IP44
Frequency 50Hz
Weight: 2.05kg
Connection cable: 0.5m length - rubber - H05RR-F4G0.75 - black
Total length: 704mm
Made in Germany