FG Artikel Nummer: 300220

138,95€

Taxes included. Shipping calculated at checkout.

Express Versand möglich

Abholung bei Fenstergigant möglich

Becker Roller Shutter Motor P5-16-E01

2009 120 110 0

Tubular motor
Without radio control
With blockage and obstacle detection
Automatic limit switch detection
VDE certification
Quiet, smooth operation
Automatic curtain length compensation
Can be connected in parallel without an isolation relay
Plug-in connection cable
Overload protection
This tubular motor is exclusively intended for use in roller shutter and roller door applications
To ensure a long service life, only rustproof, weather-resistant, and moisture-resistant materials are used
Low stress on the curtain and stop due to constant optimization of stop forces
Multiple motors can be connected in parallel and operated via a controller or switch thanks to an integrated isolation relay. The number of connectable motors depends on the load capacity of the interface and the fuse.
The connection cable is connected to the motor via a plug-in connection, is interchangeable, and is available in various versions and lengths
In the event of high heat development (e.g., due to continuous operation), a thermal circuit breaker interrupts the power supply to the motor. Operation is possible again after cooling down
Limit position setting possible via switch on the drive head without a special adjustment set
space permitting
Nominal torque: 5Nm
Nominal speed: 16 rpm
Nominal voltage: 230 V
Frequency: 50Hz
Power consumption: 80W
Current consumption: 0.35A
Outer diameter: 35mm
Protection class IP44
Frequency 50Hz
Total length: 457mm