FG Artikel Nummer: 300212

174,95€

Taxes included. Shipping calculated at checkout.

Express Versand möglich

Abholung bei Fenstergigant möglich

Becker roller shutter motor R40-17-E01

2040 120 115 0

Roller shutter motor
Wired
With blockage and obstacle detection
Automatic limit detection
VDE certification
Quiet, smooth running
Automatic fabric length compensation
Can be connected in parallel without an isolation relay
Plug-in connection cable
Overload protection
This tubular motor is exclusively suitable for use in roller shutter and roller door applications
To ensure a long service life, only stainless, weather-resistant and moisture-resistant materials are used
Low stress on the curtain and end stop through constant optimization of the stop forces
Thanks to an integrated isolation relay, several motors can be connected in parallel and operated via a control unit or switch. The number of connectable motors depends on the load capacity of the interface and the fuse.
The connection cable is connected to the motor via a plug-in connection, is replaceable, and is available in various versions and lengths
In the event of high heat generation (e.g., due to continuous operation), a thermal circuit breaker interrupts the power supply to the motor. Operation is possible again after cooling down
The curtain can wrap over the motor head. Use is also possible in the tightest of spaces
Former/alternative type designations for this motor: R../17PR+, R../17C PR+, R../17C PRO+ (e.g., R8/17C PR+)
Rated torque: 40Nm
Rated speed: 17 rpm
Rated voltage: 230 V
Frequency: 50Hz
Power consumption: 260W
Current consumption: 1.15A
Outside diameter: 45mm
Protection class IP44
Frequency 50Hz
Total length: 596.5mm