FG Artikel Nummer: 300211

164,95€

Taxes included. Shipping calculated at checkout.

Express Versand möglich

Abholung bei Fenstergigant möglich

Becker Roller Shutter Motor R30-17-E01

2030 120 118 0

Roller shutter motor
Wired (non-radio)
With blockage and obstacle detection
Automatic limit switch detection
VDE certified
Smooth, quiet operation
Automatic fabric length compensation
Can be wired in parallel without a relay
Plug-in connection cable
Overload protection
This tubular motor is exclusively suitable for use in the roller shutter and roller door sector
Only rustproof, weather-resistant, and moisture-resistant materials are used to ensure a long service life
Reduced stress on the shutter and stop due to constant optimization of the stopping forces
Integrated relay allows multiple motors to be connected in parallel and operated via a single control or switch. The number of connectable motors depends on the load capacity of the interface and the fuse.
The connection cable is connected to the motor via a plug-in connection, is interchangeable, and is available in various versions and lengths
In the event of excessive heat generation (e.g., due to continuous operation), a thermal circuit breaker interrupts the power supply to the motor. Operation is possible again after cooling down
The shutter can overwind the motor head. Use is also possible in the tightest of spaces
Former/alternative type designations for this motor: R../17PR+, R../17C PR+, R../17C PRO+ (e.g., R8/17C PR+)
Nominal torque: 30Nm
Nominal speed: 17 rpm
Nominal voltage: 230 V
Frequency: 50Hz
Power consumption: 210W
Current consumption: 0.9A
Outer diameter: 45mm
Protection class IP44
Frequency 50Hz
Total length: 582mm